Correct 33 coil green
big block 4 barrel
throttle return spring
1970-71 E body, 1971-72 b body
1968-70 340
CHZENG002
Correct 33 coil red
small block 4 barrel
throttle return spring
1970-71 E body, 1971-72 b body
1968-70 340
CHZENG003
Correct 49 coil orange
1967 big block
4 barrel throttle return spring
CHZENG004
Correct 49 coil green
with orange accent
stripe 1968 big block 4 barrel throttle
return spring
CHZENG005
Correct 22 coil green
with blue
stripe front and 18 coil red with
white stripe rear throttle return
springs for 426 Hemi dual AFB
arrangement. Also included is the
correct 19 coil black automatic
transmission kick down return spring.
CHZENG006
Correct 16 coil orange
340 and 440
Six Pack throttle return spring
CHZENG007
Correct 454 coil
gray 1969 Big Block
4 barrel throttle return spring
CHZENG009
1971 340 4-Barrel
return spring
CHBENG010
Heater hose bracket
1969-1970 B body all, 1969 Big block A
Bolts to right inner fender panel above shock tower
Includes correct hex head mounting screw
CHZENG011
Heater hose bracket
1968 and prior non A/C Big block and Hemi applications
Bolts to alternator triangle support bracket
CHZENG012
Heater hose bracket
1966-1968 Hemi B body, 1963-1966 A body, 1960's pickup
bolts to the right inner fender panel above the shock
tower
Includes correct hex head mounting screw
CHZENG013
Heater hose bracket
1969-1974 Non A/C Big block and Hemi
bolts to the alternator triangle support bracket
CHZENG014
Heater hose bracket
Some 1967 and all 1968 Non A/C big block applications
Fastens into tabs on top of right valve cover
Photo
To Come
CHBENG019
Heater hose bracket
1970 and later. Bolts to cylinder head
CHZENG049
Throttle cable
mounting bracket
Six Pack Throttle Cable Mounting Bracket complete with
hold down and phosphated hex coni keps nut. Use for
both 4-speed and automatic transmission applications.
CHZENG050
Throttle cable
mounting bracket
1969 1/2-70 440 Six Pack Throttle Cable Mounting Bracket
complete with hold down and phosphated hex coni keps
nut. Will also fit on 1971 applications with 4-speed,
but not correct for single piece automatic transmission
kickdown linkage applications. Use for both 4-speed
and automatic transmission applications. Remove pin
and spacer for use with 4-speed.
CHZENG051
Air cleaner to
carburetor stud
Air Cleaner to Carburetor stud for 1968-71 Carter AVS
applications. Can be used on un-silenced, snorkel, and
Air Grabber air cleaners. Phosphate finish with correctly
formed thread lengths on each end.
CHZENG052
A/C, alternator
adjusting strap
1967-68 Big Block with A/C alternator adjusting strap
with heater hose shield. POWDER COATED black with the
shield thermo-plastic coated. Use with #V2 hose bracket.
CHZSPR001
Hood Release Spring
67-74 A, 66-67
B except charger, 66-67 C