| |
|
|
|
| Image |
Part Number |
Description |
Buy |
|
 |
CHCSPW4 |
An exact reproduction
of a hard to find early version plug boot shield. Bolts
to the fourth exhaust manifold stud from the front to
protect #7 spark plug wire boot. For use on 1967 through
mid-1969 B-Body HP Big Block applications! |
|
 |
CHZENG015 |
Bracket fastens to
top of valve cover
Used for big block A body applications
Some 1967 and all 1968 big blocks with A/C |
|
 |
CHZENG016 |
Positive battery
cable routing bracket
Holds positive battery cable to
left frame rail
1970-74 E body, 1971-1974 B body |
|
 |
CHZENG017 |
Lower positive battery
cable routing bracket
holds the positive cable to left frame rail
1966-70 B body |
|
 |
CHBENG017 |
Upper positive battery
cable routing bracket
1966-1970 B body |
|
 |
CHZBKT201 |
Hemi positive cable
bracket, long |
|
 |
CHZBKT202 |
Hemi positive cable
bracket, short |
|
 |
CHZENG018 |
Speedometer cable
bracket
1966-1970 B body |
|
 |
CHZENG053 |
Wire bracket
1968-69 Big Block Bolts under "R" , "G", or "R2" to
left front exhaust manifold stud & bends in front of
head. Keeps wires away from engine head heat.
|
|
 |
CHZKITWR35 |
62-65 Big Block
ignition wire bracket kit
|
|
 |
CHZENG046 |
Reverse light
switch wire retaining clip
Wire retaining clip for the reverse
light switch wire on 3 and 4-speed transmissions. Mounts
under side cover retaining bolts at rear top and rear
upper locations. Zinc plated correct gauge steel and
thermo-plastic coated for proper appearance. 2 Wire
Retaining Clips required per transmission.
|
|
 |
CHZENG047 |
Wire retaining
clip for brake system indicator switch wire
Wire retaining clip for the brake
system indicator switch wire on 1967-76 A-Bodies.
Mounts to left inner fender at rear of shock tower.
Zinc plated correct gauge steel and
thermo-plastic coated for proper appearance. Comes complete
with retaining screw
|
|
 |
CHZENG048 |
Wire retaining
clip for washer pump and horn wires
Wire retaining clip for the washer
pump and horn wires or positive alternator lead on the
rear of the alternator. Zinc plated correct gauge steel
and thermo-plastic coated for proper appearance. Comes
complete with retaining screw.
|
|
 |
CHZENG028 |
Cylinder ignition
wire bracket, #8
Bolts to right rear exhaust manifold stud
|
|
 |
CHZENG029 |
Cylinder ignition
wire bracket, #7
Big block C body w/HP, Big block A body
where #7 cylinder ignition wire runs
over valve cover.
Bolts to left rear exhaust manifold stud.
|
|
 |
CHZENG030 |
Cylinder ignition
wire bracket, 1969-1971
Big block. Holds all right side wires
except #8.
Bolts to right front exhaust manifold stud.
|
|
 |
CHZENG031 |
1972-1978 Big block
Holds all right side wires except #8
Bolts to right front exhaust manifold stud.
|
|
 |
CHZENG032 |
1969-1974 Big block
Holds all right side wires except #7 on
C body and not used on Big block A body
Bolts to left front exhaust manifold stud.
|
|
 |
CHZENG033 |
1969-1974 Big block
Bolts under right thermostat housing
retainer screw.
|
|
 |
CHZENG034 |
1966-1968 Big block
Note: Some late '67 used "P". See 1968 kit
Bolts to right front exhaust manifold stud.
Holds all right side wires except #8.
Bolts to left front exhaust manifold
stud. Holds all left side wires except
for C body and big block A body.
|
|
 |
CHZENG035 |
All
Big block
Note: Most often missed and
Most important!
Bolts under right side head bolt between
cylinder #2 and #4 spark plug.
Holds #4 and #6 cylinder ignition wires.
Bolts under left side head bolt
between cylinder #1 and #3 spark plug.
Holds # 5 and #7 cylinder ignition wires.
|
|
 |
CHZENG036 |
1966-1968 Big block
Bolts under left front intake manifold
gasket retaining rail screw.
|
|
 |
CHZENG037 |
1969-1974 Big block
Bolts under left front intake manifold
gasket retaining rail screw.
|
|
 |
CHZENG038 |
1966-1968 Big block
Bolts under right thermostat
housing retaining screw.
|
|
 |
CHZENG039 |
1967-1969 Big block
A body
Bolts to left front exhaust manifold
stud on top of "L" bracket.
Holds all left side wires except for #7
Always used in conjunction with "L" bracket.
|
|
 |
CHZENG040 |
1966-1970 426 Hemi
center wire
seperator bracket.
Used on all round air cleaner
equipped cars including 1970 Charger.
Bolts to upper coil bracket bolt
and faces forward.
Bracket does not get painted with
engine since it is bolted in place
with the coil bracket at
the time of assembly.
|
|
 |
CHZENG041 |
1966-1970 426 Hemi
left wire
separator bracket
Used on all round air cleaner equipped
cars including 1970 Charger.
Bolts to front throttle return spring
bracket bolt and faces forward.
Bracket gets painted with engine assembly.
|
|
 |
CHZENG054 |
Wire seperator bracket
1969-71 426 Hemi left wire separator bracket. Used on
all oval air cleaner and SHAKER equipped cars. Bolts to
front throttle return spring bracket bolt and faces forward.
Painted with engine assembly
|
|
 |
CHZENG055 |
Wire seperator bracket
1968 Big Block. Some late 1967, all 1968. Bolts to right
front exhaust manifold stud. Holds all right side wires
except #8.
|
|
 |
CHZENG056 |
Wire bracket
1967-68 all Big Block with A/C applications. Also used
on 1969 Imperial applications with A/C. Bolts to alternator
on top of adjusting strap #987SAC. Made from correct gauge
steel, zinc plated & thermo-plastic coated for original
appearance.
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
